PA6 (Polyamide 6)

Polyamide 6, commonly known as Nylon 6, is a thermoplastic produced by ring-opening polymerization of caprolactam. It combines strength, stiffness, wear resistance and chemical resistance with good processability, making it a widely used engineering plastic for automotive, electrical and electronic, mechanical, textile and consumer applications.

Photos are for pellet appearance and colour reference only. The material, colour, performance and delivery terms are confirmed by technical review and quotation.

Key properties

  • High tensile and impact strength for mechanically loaded components.
  • Good wear resistance for gears, bearings and other sliding components.
  • Heat resistance that can be further improved through reinforcement and heat stabilization.
  • Resistance to oils, fuels, lubricants, alkalis and many industrial chemicals.
  • Good electrical insulation under dry conditions; moisture absorption must be considered during material selection.
  • Good flow and processability in injection molding, extrusion and other thermoplastic processes.
  • Good fatigue resistance under repeated mechanical loading.
  • Good surface finish for visible molded parts.

Typical applications

  • Automotive components
  • Electrical and electronic parts
  • Power tools
  • Mechanical components
  • Consumer products

Typical values from laboratory averages. Not for specification.

Packaging

  • Standard packaging is 25 kg kraft paper bags or jumbo bags, shipped on pallets. The packaging for each order is confirmed in the order.
  • Each package is marked with the grade, production batch and net weight. Before shipment, packages are sealed and protected against moisture, and pallets are reinforced.
  • Special requirements for jumbo bag fill weight, pallet size or outer package marking are confirmed in advance and costed separately.

Send us your part requirements

Tell us the part, the material or grade you use today and the annual volume. An engineer replies with a recommended grade and a quotation.

Contact Us
ZS quote request
Scroll to Top