New Energy Applications

EV Charging Inlets
New Energy Applications

EV Charging Inlets

Material: glass-fiber-reinforced, halogen-free flame-retardant PA66.

Halogen-free flame retardancy, up to UL 94 V-0 at 1.6 mm.

High strength and toughness with good dimensional stability.

High flow and good moldability.

Good weatherability and UV resistance.

Recommended grades: A90G15-30NC/BK.

EV Charging Connectors
New Energy Applications

EV Charging Connectors

Material: glass-fiber-reinforced, halogen-free flame-retardant PA66.

Halogen-free flame retardancy, up to UL 94 V-0 at 1.6 mm.

High strength and toughness with good dimensional stability.

High flow and good moldability.

Good weatherability and UV resistance.

Recommended grades: A90G15-30NC/BK.

Battery Housings
New Energy Applications

Battery Housings

Component: battery enclosure cover.

Material: high-performance PPS.

Key requirements: lightweighting, injection moldability, chemical resistance and strong mechanical performance.

Electrical Connectors
New Energy Applications

Electrical Connectors

Recommended grades: A2BK, unreinforced PA66; AG15-30, PA66 with 15-30% glass fiber.

Key requirements: heat resistance, elongation at break and snap-fit performance.

Benefits: short molding cycles, flexibility and ease of assembly.

Photovoltaic Mounting Brackets
New Energy Applications

Photovoltaic Mounting Brackets

Material: UV-resistant, glass-fiber-reinforced PA66.

Balanced mechanical strength and toughness.

Dimensional stability for assembly, supported by CAE part design and optimization.

Strong UV resistance for long-term outdoor service.

Recommended grades: A3G50BK, A2G50LBK and A2G35BK.

Depending on system design, the solution can reduce installation labor and spare-part costs by up to 75%.

Single-component logistics and consistent panel clamping.

Electrical insulation between aluminum and steel components.

Cable Industry Collaboration | Haiyan Jingfan Cable

Zhongshang New Materials works with Haiyan Jingfan Cable Co., Ltd. in the cable industry. As an upstream supplier of modified plastic compounds, we can support material selection, formulation evaluation and application development based on customers’ processing conditions and end-use requirements. Specific material solutions are discussed and confirmed according to each project’s needs.

Photos show typical applications for these compounds; they are not products we manufacture. Grades named here are examples - the final grade is confirmed after an enquiry against the part and its requirements.

Grades used on this page A90G15-30NC/BK A2BK AG15-30 A3G50BK A2G50LBK A2G35BK

Send us your part requirements

Tell us the part, the material or grade you use today and the annual volume. An engineer replies with a recommended grade and a quotation.

Contact Us
ZS quote request
Scroll to Top