Electrical and Electronic Components
Power Tools
Material: PA6.
Adjustable glass-fiber content: 10-60% in the B2G15-60 range.
Good weatherability, color stability and low-temperature performance.
High hardness and stiffness, wear resistance, fatigue resistance and dimensional stability.
Injection-molding grade: B2BK.
Electrical and Electronic Components
Coil Bobbins
A60G25NC/BK and AT60G25NC/BK: red-phosphorus flame-retardant PA66 with 25% glass fiber.
Key requirements: heat resistance, stiffness, UL 94 V-0 and UL 1446 Class B.
Benefits: electrical insulation and low phosphine emissions.
Electrical and Electronic Components
Timers
A90GV30NC/BK: halogen-free flame-retardant PA66 with 30% glass fiber.
Key requirements: heat resistance, stiffness and UL 94 V-0.
Glow-wire ignition temperature: GWIT 800°C.
Benefits: heat resistance, dimensional stability and halogen-free formulation.
Electrical and Electronic Components
USB Type-C Connector Housings
Material: glass-fiber-reinforced, brominated flame-retardant PPA.
Adjustable glass-fiber content: 10-50%.
Excellent creep resistance and RTI above 150°C.
Heat deflection temperature up to 270°C, high flow and shorter molding cycles.
Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.
Stable glow-wire performance without flaming.
CTI range: 250-350 V.
Designed to support UL 746C and IEC 60695 requirements.
Recommended grade range: H50G10-50; all colors available.
Electrical and Electronic Components
RJ45 Connectors
Material: glass-fiber-reinforced, halogen-free flame-retardant PPA.
Adjustable glass-fiber content: 10-50%.
Custom colors and laser-marking capability; RTI above 150°C.
Heat deflection temperature up to 270°C, high flow and shorter molding cycles.
Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.
Halogen- and red-phosphorus-free; designed for WEEE and RoHS compliance.
Designed to support UL 746C and IEC 60695 requirements.
High CTI range: 550-600 V and strong arc resistance.
Recommended grade range: H90G10-50; all colors available.
Electrical and Electronic Components
USB 3.0 Type-A Receptacle Housings
Material: glass-fiber-reinforced, halogen-free flame-retardant PPA.
Adjustable glass-fiber content: 10-50%.
Custom colors and laser-marking capability; RTI above 150°C.
Heat deflection temperature up to 270°C, high flow and shorter molding cycles.
Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.
Halogen- and red-phosphorus-free; designed for WEEE and RoHS compliance.
Designed to support UL 746C and IEC 60695 requirements.
High CTI range: 550-600 V and strong arc resistance.
Recommended grade range: H90G10-50; all colors available.
Electrical and Electronic Components
Mobile Device Frames
Material: glass-fiber-reinforced PPA.
Glass-fiber content: 30-60%.
Excellent creep resistance and long-term use temperature above 150°C.
Heat deflection temperature up to 270°C, high flow and shorter molding cycles.
High hardness and stiffness, wear and fatigue resistance, low water absorption and strong dimensional stability.
Recommended grade range: H2G10-50; all colors available.