Low Voltage Electrical Equipment

Flame-retardant, halogen-free and glass-fiber reinforced compounds for terminal blocks, switches, coil bobbins and circuit breaker bases.

Molded-Case Circuit Breakers (MCCBs)
Low Voltage Electrical Equipment

Molded-Case Circuit Breakers (MCCBs)

Engineering-plastic solutions for a broad range of MCCB components.

Recommended materials: PA6 and PA66.

Housings: A90G25, A90G30, H90GV30, A50G25 and A50G30; all colors available.

Shunt-trip device: J60X1V30; all colors available.

Materials for Low-to-Medium Arc-Resistance Requirements
Low Voltage Electrical Equipment

Materials for Low-to-Medium Arc-Resistance Requirements

BR2G26WH: glass-fiber-reinforced, nitrogen-based flame-retardant PA6 with a balance of stiffness and toughness for medium arc-resistance requirements.

High-Current Miniature Circuit Breakers
Low Voltage Electrical Equipment

High-Current Miniature Circuit Breakers

H90G30: high-temperature PPA with an organophosphorus flame-retardant system and 30% glass fiber.

A90G30NC/BK: PA66 with an organophosphorus flame-retardant system and 30% glass fiber.

Key requirements: heat resistance, stiffness and GWFI 960°C.

Benefits: dimensional stability and halogen-free formulation.

Arc Chutes and Bases
Low Voltage Electrical Equipment

Arc Chutes and Bases

Recommended grade: A90G30NC/BK.

Key requirements: heat resistance, stiffness, impact performance and injection moldability.

Benefits: flame retardancy, low extractables and low corrosion potential.

Arc-chute grades: H90G30NC/BK and A90G25NC/BK.

Additional benefits: flame retardancy and halogen-free formulation.

Industrial Control Housings
Low Voltage Electrical Equipment

Industrial Control Housings

H90G30: high-temperature PPA with an organophosphorus flame-retardant system and 30% glass fiber; RTI 150°C.

A90G30NC/BK: PA66 with an organophosphorus flame-retardant system and 30% glass fiber.

Key requirements: heat resistance, stiffness, GWFI 960°C, UL 94 V-0, HWI classification above 2 and laser marking.

Benefits: flame retardancy and good injection moldability.

Terminal Blocks
Low Voltage Electrical Equipment

Terminal Blocks

A80, all colors available: unfilled, halogen-free flame-retardant PA66.

C80, all colors available: unfilled, halogen-free flame-retardant PA66/PA6.

Key requirements: high flow, flexibility, UL 94 V-0 at 0.4 mm in all colors, and controlled flame and smoke performance.

Benefits: short molding cycles and support for up to 50% regrind, subject to validation.

Switches and Plugs
Low Voltage Electrical Equipment

Switches and Plugs

Recommended grades: A2NC, B2NC and C80NC.

Key requirements: high flow, stiffness and GWFI 850°C.

Benefits: good surface appearance and injection moldability.

Coil Bobbins and Supports
Low Voltage Electrical Equipment

Coil Bobbins and Supports

Recommended grades: A20G30NC/BK.

Key requirements: heat resistance, stiffness and electrical performance.

Benefits: flame retardancy and halogen-free formulation.

Circuit Breaker Bases
Low Voltage Electrical Equipment

Circuit Breaker Bases

Adjustable glass-fiber content: 10-50%.

Excellent creep resistance and RTI above 150°C.

Heat deflection temperature up to 270°C, high flow and shorter molding cycles.

Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.

Stable glow-wire performance without flaming.

CTI range: 250-350 V.

Designed to support UL 746C and IEC 60695 requirements.

Recommended grade range: H50G10-50; all colors available.

MCB Internal Structural Components
Low Voltage Electrical Equipment

MCB Internal Structural Components

Adjustable glass-fiber content: 10-50%.

Excellent creep resistance and RTI above 150°C.

Heat deflection temperature up to 270°C, high flow and shorter molding cycles.

Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.

Stable glow-wire performance without flaming.

CTI range: 250-350 V.

Designed to support UL 746C and IEC 60695 requirements.

Recommended grade range: H50G10-50; all colors available.

Magnetic Contactors
Low Voltage Electrical Equipment

Magnetic Contactors

Recommended grades: H90G30NC/BK and A90G25NC/BK.

Key requirements: heat resistance and stiffness.

Benefits: flame retardancy, halogen-free formulation and broad color availability.

Materials for Medium-to-High Arc-Resistance Requirements
Low Voltage Electrical Equipment

Materials for Medium-to-High Arc-Resistance Requirements

B90G30: glass-fiber-reinforced PA6 with an organophosphorus flame-retardant system, optimized for electrical performance and injection molding.

A90G25/30: glass-fiber-reinforced PA66 with an organophosphorus flame-retardant system, heat resistance and reduced moisture uptake.

H90G30: high-temperature, glass-fiber-reinforced polyamide with an organophosphorus flame-retardant system, heat resistance and reduced moisture uptake.

Low-Current Miniature Circuit Breakers
Low Voltage Electrical Equipment

Low-Current Miniature Circuit Breakers

BR2G26WH: halogen-free flame-retardant PA6 with 30% glass fiber.

Key requirements: heat resistance, injection moldability and GWFI 960°C.

Benefits: arc resistance and low extractables.

MCCB Housings and Structural Parts
Low Voltage Electrical Equipment

MCCB Housings and Structural Parts

Material: glass-fiber-reinforced, brominated flame-retardant PPA.

Adjustable glass-fiber content: 10-50%.

Excellent creep resistance and RTI above 150°C.

Heat deflection temperature up to 270°C, high flow and shorter molding cycles.

Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.

Stable glow-wire performance without flaming.

CTI range: 250-350 V.

Designed to support UL 746C and IEC 60695 requirements.

Recommended grade range: H50G10-50; all colors available.

Moving Contact Carriers
Low Voltage Electrical Equipment

Moving Contact Carriers

Thermoplastic alternative to selected thermoset materials.

Adjustable glass-fiber content: 10-50%.

Custom colors and laser-marking capability; RTI above 150°C.

Heat deflection temperature up to 270°C, high flow and shorter molding cycles.

Suitable for 270°C reflow soldering; stable UL 94 V-0 performance at 0.8 mm.

Halogen- and red-phosphorus-free; designed for WEEE and RoHS compliance.

Designed to support UL 746C and IEC 60695 requirements.

High CTI range: 550-600 V and strong arc resistance.

Recommended grade range: H90G10-50; all colors available.

Photos show typical applications for these compounds; they are not products we manufacture. Grades named here are examples - the final grade is confirmed after an enquiry against the part and its requirements.

Grades used on this page A90G25 A90G30 H90GV30 A50G30 J60X1V30 BR2G26WH H90G30 A90G30NC/BK H90G30NC/BK A90G25NC/BK A80 C80 A2NC B2NC C80NC A20G30NC/BK H50G10-50 B90G30 H90G10-50

Send us your part requirements

Tell us the part, the material or grade you use today and the annual volume. An engineer replies with a recommended grade and a quotation.

Contact Us
ZS quote request
Scroll to Top